FLUX Console

Pick a Project. Flash it. Learn it.

Choose any of the 12 built-in functions. Each one comes with a concept lesson, the firmware logic, and one-click flashing.

Requires Chrome or Edge with Web Serial API
function1
Project 01 | Sensor
Simple Diagram
Sensor Input
->
Action Output
Hardware Needed
Required
Optional
    Core Concept

    Dummy concept for function1.

    Why It Works

    Principle notes will appear here.

    Key Insight

    Key takeaway will appear here.

    Real-World Application

    This is where practical usage context will appear.

    The System Pipeline
    • Input: Pending project input details.
    • Process: Pending project logic details.
    • Output: Pending project output details.
    Download module PDF chart
    Logic Flow or How It Works

    Read input -> Process logic -> Drive output

    Key Variables
    Flash to ESP32
    Disconnected Project 01 selected
    1. 1Plug your ESP32 into USB.
    2. 2Click Connect & Flash. Your browser will ask for serial port permission.
    3. 3Select the correct COM port. A pop-up window opens
    4. 4Click INSTALL when the confirmation dialog appears.
    5. 5Wait for "Installation complete!" then click NEXT.
    6. 6Close the pop-up by clicking the "X" in the top-right corner of the dialog box.
    After successful installation, use the Serial Monitor below to see live data.
    Waiting...0%
    Waiting for connection...
    Serial Monitor
    ● Not connected
    --:--:--Flash the board, then click Connect to see live telemetry.
    Function Controls Legend
    Observe While Running

    Project Run Notes
    Expected Result

    Experiment Checklist
    Flash Activity
    Common Questions
    Which browsers work?

    Use current desktop Google Chrome or Microsoft Edge with Web Serial support enabled.

    Device not recognized?

    Use a data-capable USB cable, reconnect the board, close other serial apps, and select the correct COM or tty port.

    Flash fails or gets stuck?

    Retry once, then try BOOT-hold flashing and check that the board has stable power over USB.

    Output behavior seems wrong?

    Confirm wiring, pin mapping, LED strip type and color order, and test in a quieter or cleaner environment when the function uses microphone input.

    Do I need to press BOOT?

    Usually no. If auto-connect fails on some boards, hold BOOT while clicking the flash button, then release when writing starts.

    Can I switch projects while flashing?

    No. Project switching is locked during active flashing to prevent serial write corruption.

    Is my data sent anywhere?

    No cloud upload is required for flashing. The firmware is written locally from your browser to the connected board.

    Support note

    Support note: If flashing fails more than 3 times, keep the log screenshot and mail to info@logicstudio.co.in with board model & OS.